ABB REG670 - Page 782

Table 470: CH3TCP Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Off
TCP/IP
UDP-Only
-
- Off Operation mode
TCPIPLisPort 1 - 65535 - 1 20000 TCP/IP listen port
UDPPortAccData 1 - 65535 - 1 20000 UDP port to accept UDP datagrams from
master
UDPPortInitNUL 1 - 65535 - 1 20000 UDP port for initial NULL response
UDPPortCliMast 0 - 65535 - 1 0 UDP port to remote client/master
Table 471: CH3TCP Non group settings (advanced)
Name Values (Range) Unit Step Default Description
ApLayMaxRxSize 20 - 2048 - 1 2048 Application layer maximum Rx fragment
size
ApLayMaxTxSize 20 - 2048 - 1 2048 Application layer maximum Tx fragment
size
Table 472: CH4TCP Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Off
TCP/IP
UDP-Only
-
- Off Operation mode
TCPIPLisPort 1 - 65535 - 1 20000 TCP/IP listen port
UDPPortAccData 1 - 65535 - 1 20000 UDP port to accept UDP datagrams from
master
UDPPortInitNUL 1 - 65535 - 1 20000 UDP port for initial NULL response
UDPPortCliMast 0 - 65535 - 1 0 UDP port to remote client/master
Table 473: CH4TCP Non group settings (advanced)
Name
Values (Range) Unit Step Default Description
ApLayMaxRxSize 20 - 2048 - 1 2048 Application layer maximum Rx fragment
size
ApLayMaxTxSize 20 - 2048 - 1 2048 Application layer maximum Tx fragment
size
Table 474: MSTSER Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Off
On
- - Off Operation Off / On
ChToAssociate RS485
Optical
- - RS485 Channel to associate to
SlaveAddress 0 - 65519 - 1 1 Slave address
Table continues on next page
Section 14 1MRK502052-UEN B
Control
776
Technical manual