Agilent Technologies Nano Indenter G200 - Set Full Scale Load Range; Validate Method; Channel Diagnostics; Preallocate

NanoSuite 4
Agilent Nano Indenter G200 User’s Guide 4-27
Set Full Scale Load Range
This command is not available.
Validate Method
This command is used in NanoSuite Explorer. Further details on the use
of this feature are presented during Explorer training.
Channel Diagnostics…
This command is not used.
Preallocate…
This command is not used.
Recalculate Sample
This commands NanoSuite to recalculate the data for all tests in the
current sample, incorporating any changes that you have made to the
analysis.
Recalculate Test
This command causes NanoSuite to recalculate the data for the current
test, incorporating any changes that you have made to the analysis.