Agilent Technologies Nano Indenter G200 User Manual

Commonly Used Procedures 6
Agilent Nano Indenter G200 User’s Guide 6-47
7 Right-click anywhere on the schematic map and select Move to
Target from the resulting pop-up menu, as shown in
Figure 6-67.
Figure 6-67Select Move to Target from right-click menu
8 Right-click anywhere on the schematic map and select Nano Video
HandSet from the resulting pop-up menu, as shown in
Figure 6-68.
Figure 6-68Select Nano Video Handset from right-click menu
9 Find a location on the sample that is free of contaminants and dust.
10 Click green GO button to initiate testing.
11 Allow testing to complete.
12 Access the frame stiffness and area function information by choosing
Tip > Configure Tip as shown in
Figure 6-69 on page 6-48.

Agilent Technologies Nano Indenter G200 Specifications

General

Brand	Agilent Technologies
Model	Nano Indenter G200
Category	Laboratory Equipment
Language	English