Agilent Technologies Nano Indenter G200 - Launch Nanosuite

Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide 2-10
Launch NanoSuite
1 After the computer boots, double-click the NanoSuite icon on the
desktop to open NanoSuite.
2 Click the OK button in the User Login dialog box, as shown in
Figure 2-9.
Figure 2-9NanoSuite User Login dialog box
3 In the Open Method dialog box, select XP > G-Series Load, Disp,
and Time from the filename drop-down list, as shown in
Figure 2-10
on page 2-11.