Agilent Technologies Nano Indenter G200 User Manual

NanoSuite 4
Agilent Nano Indenter G200 User’s Guide 4-33
Print Preview of Tip Configuration
This command displays a Notepad text file listing all pertinent tip
information for viewing before a print is made. Choose Print from the
Notepad File menu to print this information.
Change Indenter Tip
This command initiates the procedure for changing the indenter tip.
After selecting this command, three dialog boxes will appear, each
requiring you to click the OK button:
1 The first step parks the head and moves the stages into a position that
allows easy access to the tip.
2 The second step asks you to ensure that the locking pins are in place
in the indenter shaft before performing a tip change.
3 The third step asks you to change the tip.
For more information, refer to Changing the Indenter in Chapter 6,
"Commonly Used Procedures".

Agilent Technologies Nano Indenter G200 Specifications

General

Brand	Agilent Technologies
Model	Nano Indenter G200
Category	Laboratory Equipment
Language	English