Read This First
Agilent Nano Indenter G200 User’s Guide 3
Read This First
Warranty
Agilent warrants Agilent hardware, accessories and supplies against
defects in material and workmanship for a period of one year from date
of shipment. If Agilent receives notice of such defects during the
warranty period, Agilent will, at its option, either repair or replace
products which prove to be defective. Replacement products may be
either new or like-new.
Agilent warrants that Agilent software will not fail to execute its
programming instructions for the period specified above due to defects
in material and workmanship when properly installed and used. If
Agilent receives notice of such defects during the warranty period,
Agilent will replace software media which does not execute its
programming instructions due to such defects. For detailed warranty
information, see back matter.
Safety Considerations
• General - This product and related documentation must be reviewed
for familiarization with these safety markings and instructions before
operation.
This product is a safety Class I instrument (provided with a
protective earth terminal).
• Before Applying Power - Verify that the product is set to match the
available line voltage and the correct fuse is installed.
• Before Cleaning - Disconnect the product from operating power
before cleaning.
• Safety Earth Ground - An uninterrupted safety earth ground must
be provided from the main power source to the product input wiring
terminals or supplied power cable.
Specifications
Environmental Conditions
Temperature (Operating): 5 to 40 °C
Temperature (Non-operating): -40 to 70 °C
Relative Humidity (Operating): 15 to 95 % non-condensing
Altitude: 2000 m
To Next Page
Loading...
Need help?
General
