Agilent Technologies Nano Indenter G200 User Manual

NanoSuite 4
Agilent Nano Indenter G200 User’s Guide 4-19
Configure Menu
This menu is available on the Test Page and Review Pages only. The
commands in the Configure menu, shown in Figure 4-20, are used to set
up devices, meters, statistics, the toolbar, review graph, and real-time
graph. The Grip Separation command is dimmed and not available for
nano indentation.
Figure 4-20Configure menu
Device…
This command enables you to reset instrument calibrations. This menu
item should be used only in consultation with Agilent technical support.
Meters…
This command enables you to control which channels are displayed on
the
Test Page and how the channels are displayed. After selecting this
menu item, the Meter Configuration dialog box appears, as shown in
Figure 4-21 on page 4-20. You can make adjustments to the displayed
meters and channels in this dialog box. Click the OK button when you
are satisfied with the configuration.
NOTE
To revert back to a previous meter configuration, select Restore Screen
to Method Saved Configuration from the
View Menu.

Agilent Technologies Nano Indenter G200 Specifications

General

Brand	Agilent Technologies
Model	Nano Indenter G200
Category	Laboratory Equipment
Language	English