Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide 2-19
Figure 2-22Slide sample tray into the motion system
3 Tighten the locking screw in the right sample tray retaining rail.
Adjust the Height of the Samples
The height of the sample in the center of the sample tray has been set by
the technician who installed the instrument. The center sample will be
the reference height for all other samples. The following procedure
assumes that the height of the sample in the center of the sample tray has
not been changed. Adjusting the height of the center sample requires
Agilent technical support.
To Next Page
Loading...
