Agilent Technologies Nano Indenter G200 User Manual

NanoSuite 4
Agilent Nano Indenter G200 User’s Guide 4-42
Excel Output This icon outputs data to Microsoft Excel for data manipulation.
Edit Memo Use this icon to create or edit a Sample memo. Use it to store
comments about how the tests were run or how the specimen
performed. Memos may be included within sample reports.
Configure Review
Graph
Use this icon to adjust the settings of the Review page graph.
Recalculate Batch Use this icon to recalculate the batch data.
Recalculate Test Use this icon to recalculate data for a single test.
Individual Mode Use this icon to switch to individual mode. It only runs tests of
individual specimens. It does not perform batches of tests on a
specimen.
Batch Mode Use this icon to switch to batch mode.
Previous Sample Uploads data from the previous sample within the batch.
Next Sample Uploads data from the next sample within the batch.
Run Test Use this icon to begin testing.
Exit Use this icon to exit the software.

Agilent Technologies Nano Indenter G200 Specifications

General

Brand	Agilent Technologies
Model	Nano Indenter G200
Category	Laboratory Equipment
Language	English