NanoSuite Explorer D
Agilent Nano Indenter G200 User’s Guide D-9
Figure D-9Data Collection tab
When the Data Collection tab is selected, the Test Flow Pane reveals the
status of each test segment, either:
1 Disabled or
2 Data Collection: Rate @ Data Acquisition Rate
Enabling data collection enables you to specify how the data are
acquired. You can select a constant rate.
Less commonly used are Level Crossing and Peak Valley, which are
described in the online Help. Buffer, Take Data on Pause, and Preserve
Last Data Points are also covered in the online Help.
To Next Page
Loading...
