AIXTRON CRIUS II - Compulsory Reading Material; Introduction; Residual Dangers; Responsibilities Regarding Safety

crius_II_en_00, Edition 06/2010
18 CONFIDENTIAL AIXTRON - Dokumentation
Safety System Manual
Introduction CRIUS II
2
2.1 Introduction
2.1.1 Compulsory reading material!
2.1.2 Residual dangers
The CRIUS II is constructed according to the most recent state of the art tech-
nology and to the officially approved safety regulations. The equipment has
been subjected to a meticulous safety check and a safety acceptance test.
However it is impossible to rule out the possibility of residual dangers during
operation. Hazards exist:
• For personal safety of the operator
• For the CRIUS II and other property
For this reason, all work carried out in conjunction with the CRIUS II must be
performed by trained personnel only and in accordance with this System Man-
ual. The technical data must be observed on principle.
2.1.3 Responsibilities regarding safety
AIXTRON scope of responsibility
AIXTRON is responsible for the safety of the CRIUS II.
End user scope of responsibility
The end user is responsible for safety in the workspace around the CRIUS II.
The end user is also responsible for making sure that all safety regulations
pertaining to work at the CRIUS II are adhered to.
NOTE:
Read this chapter prior to any work at the CRIUS II! It contains important
information for your own personal safety. This chapter must have been
read and understood by all persons who work at the CRIUS II during any
stage of its serviceable life.