Anritsu MS2830A - 3.10.6 Spectrum Emission Mask Measurement function settings

3.10 Measure Function Settings
3-31
Native Device Message List
3
Native Device Message List
3
3.10.6 Spectrum Emission Mask Measurement function settings
Device messages for spectrum emission mask measurement settings are shown in Table 3.10.6-1.
Table 3.10.6-1 Spectrum Emission Mask measurement function setting messages
Function Command Query Response Remarks
Measure Spectrum Emission
Mask
SEM switch_com
SEM?
switch_res
switch_com:
ON|OFF|1|0
MEAS SEM
MEAS?
SEM
MEAS OFF
OFF
Spectrum Emission Mask
Attenuator
SEM:ATT rel_ampl
SEM:ATT? rel_ampl
SEM:ATT AUTO
Spectrum Emission Mask
Resolution Bandwidth
SEM:BAND SEM:BAND? bandwidth
Spectrum Emission Mask
Resolution
Bandwidth Auto/Manual
SEM:BAND:AUTO
switch_com
SEM:BAND:AUTO? switch_res
switch_com:
ON|OFF|1|0
Spectrum Emission Mask
Integrate Bandwidth
SEM:BAND:CHAN
bandwidth
SEM:BAND:CHAN? bandwidth
Spectrum Emission Mask Video
Bandwidth
SEM:BAND:VID bandwidth
SEM:BAND:VID? bandwidth
SEM:BAND:VID OFF
Spectrum Emission Mask Video
Bandwidth Auto/Manual
SEM:BAND:VID:AUTO
switch_com
SEM:BAND:VID:AUTO? switch_res
Spectrum Emission Mask Video
Bandwidth Mode
SEM:BAND:VID:MODE
method
SEM:BAND:VID:MODE? method
method
: Bandwidth mode
= VID|POW
Spectrum Emission Mask
Reference Power
SEM:CARR ampl SEM:CARR? ampl