Anritsu MS2830A - [:SENSe]:FREQuency:OFFSet:STATe ON|OFF|1|0; [:SENSe]:FREQuency:OFFSet:STATe?

2.1 Frequency/Span
2-39
2
SCPI Device Message Details
[:SENSe]:FREQuency:OFFSet:STATe ON|OFF|1|0
Frequency Offset Mode
Function
This command enables/disables the frequency offset.
Command
[:SENSe]:FREQuency:OFFSet:STATe <switch>
Parameter
<switch>
Frequency offset On/Off
ON|1
Enables the frequency offset.
OFF|0
Disables the frequency offset (Default value).
Example of Use
To enable the frequency offset.
FREQ:OFFS:STAT ON
[:SENSe]:FREQuency:OFFSet:STATe?
Frequency Offset Mode Query
Function
This command queries the On/Off state of the frequency offset.
Query
[:SENSe]:FREQuency:OFFSet:STATe?
Response
<switch>
Parameter
<switch>
Frequency offset On/Off
1
Frequency offset is enabled.
0
Frequency offset is disabled.
Example of Use
To query the On/Off state of the frequency offset.
FREQ:OFFS:STAT?
> 1