Anritsu MS2830A - [:SENSe]:SEMask:AVERage:COUNt?

Chapter 2 SCPI Device Message Details
2-702
[:SENSe]:SEMask:AVERage:COUNt?
Average Count Query
Function
This command queries the storage count.
Command
[:SENSe]:SEMask:AVERage:COUNt?
Parameter
<integer>
Storage count
Range 2 to 9999
Default 10
Example of Use
To query the storage count.
SEM:AVER:COUN?
> 110
Related command
This command has the same function as the following commands.
[:SENSe]:AVERage:COUNt?
[:SENSe]:ACPower:AVERage:COUNt?
[:SENSe]:CHPower:AVERage:COUNt?
[:SENSe]:OBWidth:AVERage:COUNt?
[:SENSe]:BPOWer|:TXPower:AVERage:COUNt?