Anritsu MS2830A - :CALCulate:SEMask:CARRier[:POWer] <ampl>

Chapter 2 SCPI Device Message Details
2-590
:CALCulate:SEMask:CARRier[:POWer] <ampl>
Spectrum Emission Mask Reference Power
Function
This command sets the reference power for Spectrum Emission Mask
measurement.
Command
:CALCulate:SEMask:CARRier[:POWer] <ampl>
Parameter
<ampl>
Reference power
Range –200 to 200 dBm
Resolution 0.01 dB
Suffix code DBM,DM
dBm is used when omitted.
Details
This command is not available when Reference Mode is set to either of
the following:
•
Channel
•
Peak
Example of Use
To set the reference power to
−
10 dBm.
CALC:SEM:CARR -10
Related command
This command has the same function as the following command.
[:SENSe]:SEMask:CARRier[:POWer] <ampl>