Anritsu MS2830A - [:SENSe]:FREQuency:CENTer <freq>

2.1 Frequency/Span
2-33
2
SCPI Device Message Details
[:SENSe]:FREQuency:CENTer <freq>
Center Frequency
Function
This command sets the center frequency.
Command
[:SENSe]:FREQuency:CENTer <freq>
Parameter
<freq>
Center frequency
Range
[MS269xA]
–100 MHz to 6.05 GHz (MS2690A)
–100 MHz to 13.6 GHz (MS2691A)
–100 MHz to 26.6 GHz (MS2692A)
[MS2830A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 13.6 GHz (Option 043)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 43.1 GHz (Option 045)
[MS2840A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 27 GHz (Option 044)
–100 MHz to 45 GHz (Option 046)
Resolution 1 Hz
Suffix code HZ, KHZ, KZ, MHZ, MZ, GHZ, GZ
Hz is used when omitted.
Default
[MS269xA]
3.00 GHz (MS2690A)
6.75 GHz (MS2691A)
13.25 GHz (MS2692A)
[MS2830A]
1.8 GHz (Option 040)
3.0 GHz (Option 041)
6.75 GHz (Option 043)
13.25 GHz (Option 044)
21.5 GHz (Option 045)
[MS2840A]
1.8 GHz (Option 040)
3.0 GHz (Option 041)
13.25 GHz (Option 044)
22.25 GHz (Option 046)