Anritsu MS2830A - :CALCulate:LLINe[1]|2|3|4|5|6:MIRRor ON|OFF|1|0

Chapter 2 SCPI Device Message Details
2-226
:CALCulate:LLINe[1]|2|3|4|5|6:MIRRor ON|OFF|1|0
Mirror Limit
Function
This command turns on or off the mirroring function that copies the
Limit Line settings of the right half to the left half.
Command
:CALCulate:LLINe[1]|2|3|4|5|6:MIRRor <switch>
Parameter
<switch>
Mirroring function
OFF|0
OFF (Default)
ON|1
ON
Details
This command is available only when the Limit Line Type (Frequency) is
set to Relative.
Example of Use
To set the mirroring function to ON.
:CALC:LLIN:MIRR ON