Anritsu MS2830A - [:SENSe]:OBWidth:DETector[:FUNCtion] NORMal|POSitive|SAMPle|NEGative|RMS|QPEak|CAVerage|CRMS; [:SENSe]:OBWidth:DETector[:FUNCtion]?

2.12 OBW
2-567
2
SCPI Device Message Details
[:SENSe]:OBWidth:DETector[:FUNCtion]
NORMal|POSitive|SAMPle|NEGative|RMS|QPEak|CAVerage|CRMS
Detection Mode
Function
This command selects the detection mode of the waveform pattern.
Refer to
[:SENSe]:DETector[:FUNCtion].
Related command
This command has the same function as the following commands.
[:SENSe]:DETector[:FUNCtion]
[:SENSe]:ACPower:DETector[:FUNCtion]
[:SENSe]:CHPower:DETector[:FUNCtion]
:CALCulate:ACPower:DETector[:FUNCtion]
:CALCulate:CHPower:DETector[:FUNCtion]
:CALCulate:OBWidth:DETector[:FUNCtion]
[:SENSe]:OBWidth:DETector[:FUNCtion]?
Detection Mode Query
Function
This command queries the detection mode of the waveform pattern.
Refer to
[:SENSe]:DETector[:FUNCtion]?.
Related command
This command has the same function as the following commands.
[:SENSe]:DETector[:FUNCtion]?
[:SENSe]:ACPower:DETector[:FUNCtion]?
[:SENSe]:CHPower:DETector[:FUNCtion]?
[:SENSe]:SEMask:DETector:CARRier[:FUNCtion]?
:CALCulate:DETector[:FUNCtion]?
:CALCulate:ACPower:DETector[:FUNCtion]?
:CALCulate:CHPower:DETector[:FUNCtion]?
:CALCulate:OBWidth:DETector[:FUNCtion]?