Anritsu MS2830A - :CALCulate:LLINe[1]|2|3|4|5|6:CMODe:FREQuency?

2.6 Trace
2-207
2
SCPI Device Message Details
:CALCulate:LLINe[1]|2|3|4|5|6:CMODe:FREQuency?
Limit Line Type (Frequency) Query
Function
This command queries whether the horizontal axis of Limit Line
represents in absolute or relative values.
Query
:CALCulate:LLINe[1]|2|3|4|5|6:CMODe:FREQuency?
Response
<mode>
Parameter
<mode>
Representation of setting values for horizontal axis
FIX
Absolute values
REL
Relative values
Example of Use
To query the horizontal axis setting of Limit Line.
CALC:LLIN:CMOD:FREQ?
> FIX