Anritsu MS2830A - GATESLP;GATESLP?

Chapter
４
Native Device Message Details
4-107
4
Native Device Message Details
GATESLP/GATESLP?
Gate Slope
Function
This command sets the gate signal detection mode.
Command
GATESLP edge
Query
GATESLP?
Response
edge
Parameter
edge
Gate signal detection mode
RISE
Detects using the rising edge.
FALL
Detects using the falling edge.
Details
This setting is applied when the gate signal source is wideband IF
detection (Wide IF video), external input, SG marker, or Baseband
Interface (BBIF).
Example of Use
To detect using rising edge:
GATESLP RISE
GATESLP?
> RISE