Anritsu MS2830A - MEAS:BATC:ACP?

Chapter
４
Native Device Message Details
4-143
4
Native Device Message Details
MEAS:BATC:ACP?
Adjacent Channel Power Batch Measure
Function
This command executes ACP measurement and outputs the result after
the parameters described in the specified parameter list file have been
set.
Query
MEAS:BATC:ACP? n,filename[,device]
Response
The same response as
:MEASure:ACP[n]?
returns.
Refer to
:MEASure:ACP[n]?
in “Chapter 2 SCPI Device Message
Details”.
Parameter
n
Measurement Option
Refer to
:MEASure:ACP[n]?
in “Chapter 2
SCPI Device Message Details”.
filename
Parameter List File
Specify with any character string enclosed by
double quotes (
" "
) or single quotes (' ')
device
Drive name
A,B,D,E,F,...
D
drive is used when omitted.
Details
This command executes ACP measurement and outputs the result after
the parameters described in the specified parameter list have been set.
The value returned by this command differs depending on Result Mode.
(cf.
SYST:RES:MODE
)
Place parameter list files in a folder on the specified drive.
<device>:\Anritsu Corporation\Signal Analyzer\User Data\Batch
If the parameter list file has been changed, the changes must be applied
with the
MMEM:REL:BATC
command.
(cf.
MMEM:REL:BATC
)