Anritsu MS2830A - :CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:FCOunt[:STATe]?

2.4 Marker
2-157
2
SCPI Device Message Details
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:FCOunt[:STATe ]?
Frequency Counter State Query
Function
This command queries the On/Off status of frequency counter.
Query
:CALCulate:MARKer[n]:FCOunt[:STATe]?
Response
<switch>
Parameter
<n>
Marker number
1
Marker 1
2
Marker 2
3
Marker 3
4
Marker 4
5
Marker 5
6
Marker 6
7
Marker 7
8
Marker 8
9
Marker 9
10
Marker 10
When omitted: Marker 1
<switch>
Frequency counter On/Off
1
Frequency counter is On.
0
Frequency counter is Off.
Details
This setting is shared in common for all the markers.
Example of Use
To query the On/Off status of the frequency counter.
CALC:MARK:FCO?
> 1