Anritsu MS2830A - [:SENSe]:SEMask:LOGic:OFFSet[1]:LIST:TEST?

Chapter 2 SCPI Device Message Details
2-676
Related command
This command has the same function as the following command.
:CALCulate:SEMask:LOGic:OFFSet[1]:LIST:TEST
[:SENSe]:SEMask:LOGic:OFFSet[1]:LIST:TEST?
Spectrum Emission Mask Fail Logic Query
Function
This command queries the judgment method of the offset for Spectrum
Emission Mask measurement.
Query
[:SENSe]:SEMask:LOGic:OFFSet[1]:LIST:TEST?
Response
<logic_n>
Parameter
<logic_n>
Judgment method for offset n
OFF
Does not judge.
ABS
ABS1
Judges by using the absolute level upper limit 1.
REL
REL
Judges by using the relative level upper limit.
AND
ABS1 and REL
Judges “AND” by using the absolute level upper
limit 1 and the relative level upper limit.
OR
ABS1 or REL
Judges “OR” by using the absolute level upper
limit 1 and the relative level upper limit.
AAND
(ABS1 and REL) and ABS2
Judges “AND” by using the absolute level upper
limit 1 and relative level upper limit. Judges
“AND” by using the result and the absolute level
upper limit 2.
AOR
(ABS1 or REL) and ABS2
Judges “OR” by using the absolute level upper
limit 1 and relative level upper limit. Judges
“AND” by using the result and the absolute level
upper limit 2.
AND2
ABS1 and ABS2
Judges by using the absolute level upper limit 1