Anritsu MS2830A - [:SENSe]:FREQuency:STOP?

2.1 Frequency/Span
2-47
2
SCPI Device Message Details
Example of Use
To set the stop frequency to 10 MHz.
FREQ:STOP 10000KHZ
[:SENSe]:FREQuency:STOP?
Stop Frequency Query
Function
This command queries the stop frequency.
Query
[:SENSe]:FREQuency:STOP?
Response
<freq>
Parameter
<freq>
Stop frequency
Range
[MS269xA]
–99.9997 MHz to 6.05 GHz (MS2690A)
–99.9997 MHz to 13.6 GHz (MS2691A)
–99.9997 MHz to 26.6 GHz (MS2692A)
[
MS2830A]
–99.9997 MHz to 3.7 GHz (Option 040)
–99.9997 MHz to 6.1 GHz (Option 041)
–99.9997 MHz to 13.6 GHz (Option 043)
–99.9997 MHz to 26.6 GHz (Option 044)
–99.9997 MHz to 43.1 GHz (Option 045)
[
MS2840A]
–99.9997 MHz to 3.7 GHz (Option 040)
–99.9997 MHz to 6.1 GHz (Option 041)
–99.9997 MHz to 27 GHz (Option 044)
–99.9997 MHz to 45 GHz (Option 046)
Resolution 1 Hz
Suffix code None. Value is returned in Hz units.
Example of Use
To query the stop frequency.
FREQ:STOP?
> 10000000