Anritsu MS2830A - :CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?

Chapter 2 SCPI Device Message Details
2-120
Example of Use
To set the reference marker for Marker 2 to 4.
CALC:MARK2:REF 4
Related Commands
This command has the same function as the following commands.
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:
REFerence
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?
Relative To Query
Function
This command queries the reference marker when the marker mode is
set to Delta.
Query
:CALCulate:MARKer[n]:REFerence?
Response
<integer>
Parameter
<n>
Marker number to set
1
Marker 1
2
Marker 2
3
Marker 3
4
Marker 4
5
Marker 5
6
Marker 6
7
Marker 7
8
Marker 8
9
Marker 9
10
Marker 10
When omitted: Marker 1