2
SCPI Device Message Details
[:SENSe]:ACPower:CARRier[1]:LIST:METHod IBW|RRC|RC
Adjacent Channel Power Filter Type
Function
This command sets the filter type of the carrier for Adjacent Channel
Power measurement.
Command
[:SENSe]:ACPower:CARRier[1]:LIST:METHod <method>
Parameter
<method>
Filter type of carrier
IBW
Rectangle filter
RRC
Root Nyquist filter (Default)
RC
Nyquist filter
Example of Use
To set the filter type of the carrier for ACP measurement to Root
Nyquist.
ACP:CARR:METH RRC
Related command
This command has the same function as the following command.
:CALCulate:ACPower:CARRier[1]:LIST:METHod
:CALCulate:ACPower:CARRier[1]:LIST:METHod IBW|RRC|RC
Adjacent Channel Power Filter Type
Function
This command sets filter type of the carrier forAdjacent Channel Power
measurement.
Refer to
[:SENSe]:ACPower:CARRier[1]:LIST:METHod.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:CARRier[1]:LIST:METHod
To Next Page
Loading...
