Anritsu MS2830A - [:SENSe]:RADio:STANdard[:SELect] OFF|WCDMADN|WCDMAUP|MWIMAXDL|MWIMAXUL|3 GLTE_DL|3 GLTE_UL|ETC_DSRC|TDSCDMA|XGPHS|CDMA2 KFWD|EVDOFWD|3 GLTE_TDD_DL|3 GLTE_TDD_UL|ISDBTMM|WLAN|ISDBT|LRWPANS|APCO_P25|MICROLINKETSI|NXDN|ISDBTSB

2.8 Measure Function
2-321
2
SCPI Device Message Details
[:SENSe]:RADio:STANdard[:SELect]
OFF|WCDMADN|WCDMAUP|MWIMAXDL|MWIMAXUL|3GLTE_DL|3GLTE_
UL|ETC_DSRC|TDSCDMA|XGPHS|CDMA2KFWD|EVDOFWD|3GLTE_TDD
_DL|3GLTE_TDD_UL|ISDBTMM|WLAN|ISDBT|LRWPANS|APCO_P25|MICR
OLINKETSI|NXDN|ISDBTSB
Select Standard
Function
This command selects parameter setting type for the Measure function,
using a communication standard.
Command
[:SENSe]:RADio:STANdard[:SELect] <standard>
Parameter
<standard>
Communication standard
OFF
Off
WCDMADN
3GPP W-CDMA Downlink
WCDMAUP
3GPP W-CDMA Uplink
MWIMAXDL
Mobile WiMAX (IEEE802.16e) Downlink
MWIMAXUL
Mobile WiMAX (IEEE802.16e) Uplink
3GLTE_DL
3GPP LTE Downlink
3GLTE_UL
3GPP LTE Uplink
ETC_DSRC
ARIB STD-T75
TDSCDMA
3GPP TDD 1.28Mcps Option
XGPHS
XG-PHS
CDMA2KFWD
3GPP2 CDMA2000 Forward Link
EVDOFWD
3GPP2 EV-DO Forward Link
3GLTE_TDD_DL
3GPP LTE TDD Downlink
3GLTE_TDD_UL
3GPP LTE TDD Uplink
ISDBTMM
ISDB-Tmm
WLAN
WLAN (IEEE802.11)
ISDBT
ISDB-T
LRWPANS
LR-WPANs (IEEE802.15.4)
APCO_P25
APCO P25
MICROLINKETSI
Microlink ETSI
NXDN
NXDN
ISDBTSB
ISDB-T
SB
Example of Use
To select parameters conforming to the 3GPP W-CDMA Uplink.
RAD:STAN WCDMAUP