Anritsu MS2830A - :DISPlay:WINDow[1]:TRACe:Y[:SCALe]:SPACing LINear|LOGarithmic; :DISPlay:WINDow[1]:TRACe:Y[:SCALe]:SPACing?

2.2 Level
2-65
2
SCPI Device Message Details
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:SPACing LINear|LOGarithmic
Scale Mode
Function
This command switches the scale mode.
Command
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:SPACing <mode>
Parameter
<mode>
Scale mode
LOGarithmic
Log scale (Default value)
LINear
Linear scale
Details
When the scale mode has been set to Linear, the following functions are
set to Off.
・
Measure function
・
Math function (Log calculation)
Example of Use
To set the scale mode to linear scale.
DISP:WIND:TRAC:Y:SPAC LIN
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:SPACing?
Scale Mode Query
Function
This command queries the scale mode.
Query
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:SPACing?
Response
<mode>
Parameter
<mode>
Scale mode
LOG
Log scale
LIN
Linear scale
Example of Use
To query the scale mode.
DISP:WIND:TRAC:Y:SPAC?
> LIN