Anritsu MS2830A - [:SENSe]:FREQuency:SPAN:FULL

2.1 Frequency/Span
2-43
2
SCPI Device Message Details
Related command
This command has the same function as the following commands.
[:SENSe]:ACPower:FREQuency:SPAN?
[:SENSe]:CHPower:FREQuency:SPAN?
[:SENSe]:OBWidth:FREQuency:SPAN?
[:SENSe]:FREQuency:SPAN:FULL
Full Span
Function
This command maximizes the span frequency.
Command
[:SENSe]:FREQuency:SPAN:FULL
Parameter
<freq>
Full span frequency
Range
[MS269xA]
6.15 GHz (MS2690A)
13.70 GHz (MS2691A)
27.10 GHz (MS2692A)
[MS2830A]
3.8 GHz (Option 040)
6.2 GHz (Option 041)
13.7 GHz (Option 043)
26.7 GHz (Option 044)
43.2 GHz (Option 045)
[MS2840A]
3.8 GHz (Option 040)
6.2 GHz (Option 041)
27.1 GHz (Option 044)
45.1 GHz (Option 046)
Details
This command is not available during the Spectrum Emission Mask
measurement or the Spurious Emission measurement.
Example of Use
To maximize the frequency span.
FREQ:SPAN:FULL
Related command
This command has the same function as the following commands.
[:SENSe]:ACPower:FREQuency:SPAN:FULL
[:SENSe]:CHPower:FREQuency:SPAN:FULL
[:SENSe]:OBWidth:FREQuency:SPAN:FULL