Anritsu MS2830A - :CALCulate:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO ON|OFF|1|0; [:SENSe]:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO?

2.15 Setting the TOI Measurement Functions
2-831
2
SCPI Device Message Details
Example of Use
To automatically set the tone frequency.
TOI:FREQ:BASE:AUTO ON
Related Command
This command has the same function as the following command.
:CALCulate:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO
<switch>
:CALCulate:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO ON|OFF|1|0
TOI Tone Frequency Auto/Manual
Function
This command turns on and off the automatic setting of the tone
frequency for the TOI measurement.
Refer to
[:SENSe]:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO
<switch>.
Related Command
This command has the same function as the following command.
[:SENSe]:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO <switch>
[:SENSe]:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO?
TOI Tone Frequency Auto/Manual Query
Function
This command queries whether the automatic setting of the tone
frequency for the TOI measurement is on or off.
Query
[:SENSe]:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO?
Response
<switch>
Parameter
<switch>
Automatic setting of the frequency for the TOI
measurement ON/OFF
ON|1
ON
OFF|0
OFF