Anritsu MS2830A - [:SENSe]:SEMask:OFFSet[1]:LIST:STATe <switch_1>[,<switch_2>[,<switch_3>[,<switch_4>[,<switch_5>[,<switch_6>[,<switch_7>[,<switch_8>[,<switch_9>[,<switch_10>[,<switch_11>[,<switch_12>]]]]]]]]]]]

2.13 Spectrum Emission Mask
2-657
2
SCPI Device Message Details
[:SENSe]:SEMask:OFFSet[1]:LIST:STATe
<switch_1>[,<switch_2>[,<switch_3>[,<switch_4>[,<switch_5>[,<switch_6>[,<
switch_7>[,<switch_8>[,<switch_9>[,<switch_10>[,<switch_11>[,<switch_12>]
]]]]]]]]]]
Spectrum Emission Mask Offset On/Off
Function
This command sets the offset for Spectrum Emission Mask measurement
On/Off.
Command
[:SENSe]:SEMask:OFFSet[1]:LIST:STATe <switch_n>
Parameter
<switch_n>
Offset-n On/Off
ON|1
Sets the offset to On.
OFF|0
Sets the offset to Off.
Example of Use
To set the offset.
SEM:OFFS:LIST:STAT
ON,ON,ON,ON,OFF,OFF,ON,ON,ON,ON,OFF,OFF