Anritsu MS2830A - :DISPlay:ANNotation:UNCal[:STATe] ON|OFF|1|0; :DISPlay:ANNotation:UNCal[:STATe]?

Chapter 2 SCPI Device Message Detail
2-952
:DISPlay:ANNotation:UNCal[:STATe] ON|OFF|1|0
Display Uncal Message
Function
This command enables/disables the UNCAL display when Uncal occurs.
Command
:DISPlay:ANNotation:UNCal[:STATe] <switch>
Parameter
<switch>
UNCAL display On/Off
ON|1
Enables the UCAL display.
OFF|0
Disables the UCAL display.
Example of Use
To disable the UNCAL display.
DISP:ANN:UNC OFF
:DISPlay:ANNotation:UNCal[:STATe]?
Display Uncal Message Query
Function
This command queries the On/Off state of the Uncal display when Uncal
occurs.
Query
:DISPlay:ANNotation:UNCal[:STATe]?
Response
<switch>
Parameter
<switch>
UNCAL display On/Off
1
UCAL display is enabled.
0
UCAL display is disabled.
Example of Use
To query the On/Off state of the UNCAL display.
DISP:ANN:UNC?
> 0