Anritsu MS2830A - SEM:OFFS:LIST:BAND:INT;SEM:OFFS:LIST:BAND:INT?

Chapter
４
Native Device Message Details
4-230
Details
The setting range of this function is limited depending on the settings of
other parameters. Refer to
MS2690A/MS2691A/MS2692A Signal
Analyzer Operation Manual(Spectrum Analyzer Function Operation)
or
MS2830A/MS2840A Signal Analyzer Operation Manual (Spectrum
Analyzer Function Operation)
for details.
Example of Use
To set the resolution bandwidth of the offset automatically.
SEM:OFFS:LIST:BAND:AUTO
ON,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON
SEM:OFFS:LIST:BAND:AUTO?
> 1,1,1,1,1,1,1,1,1,1,1,1
SEM:OFFS:LIST:BAND:INT/SEM:OFFS:LIST:BAND:INT?
Spectrum Emission Mask Offset Integrate Bandwidth
Function
This command sets Integrate BW of the offset for Spectrum Emission
Mask measurement.
Command
SEM:OFFS:LIST:BAND:INT
bandwidth_1[,bandwidth_2[,bandwidth_3[,bandwidth_4[,band
width_5[,bandwidth_6[,bandwidth_7[,bandwidth_8[,bandwidt
h_9[,bandwidth_10[,bandwidth_11[,bandwidth_12]]]]]]]]]]]
Query
SEM:OFFS:LIST:BAND:INT?
Response
bandwidth_1,bandwidth_2,bandwidth_3,bandwidth_4,bandwidt
h_5,bandwidth_6,bandwidth_7,bandwidth_8,bandwidth_9,band
width_10,bandwidth_11,bandwidth_12
Returns a value of Hz units, without a suffix code.