Anritsu MS2830A - [:SENSe]:SWEep:EGATe[:STATe] ON|OFF|1|0; [:SENSe]:SWEep:EGATe[:STATe]?

2.7 Sweep/Trigger/Gate
2-293
2
SCPI Device Message Details
[:SENSe]:SWEep:EGATe[:STATe] ON|OFF|1|0
Gate Sweep
Function
This command sets the gate sweep to On/Off.
Command
[:SENSe]:SWEep:EGATe[:STATe] <switch>
Parameter
<switch>
Gate sweep On/Off
ON|1
Uses the gate sweep.
OFF|0
Does not use the gate sweep.
Details
This command is not available when Internal Signal Generator Control
On/Off is On.
Example of Use
To set the gate sweep to On/Off.
SWE:EGAT ON
[:SENSe]:SWEep:EGATe[:STATe]?
Gate Sweep Query
Function
This command queries the On/Off state of the gate sweep.
Query
[:SENSe]:SWEep:EGATe[:STATe]?
Response
<switch>
Parameter
<switch>
Gate sweep On/Off
1
Uses the gate sweep.
0
Does not use the gate sweep.
Example of Use
To query the On/Off state of the gate sweep.
SWE:EGAT?
> 1