Anritsu MS2830A - [:SENSe]:SEMask:OFFSet[1]:LIST:SWEep[1][:TYPE][:AUTO]:RULes:RTYPe?

Chapter 2 SCPI Device Message Details
2-710
[:SENSe]:SEMask:OFFSet[1]:LIST:SWEep[1][:TYPE][:AUTO]:RULes:RTYPe
?
Spectrum Emission Mask Offset Sweep Type Select Rules Real Type Query
Function
This command queries the sweep mode (sweep or FFT) that is executed
during offset measurement in the Spectrum Emission Mask
measurement.
Query
[:SENSe]:SEMask:OFFSet[1]:LIST:SWEep[1][:TYPE][:AUTO]:RU
Les:RTYPe?
Response
<type_1>,<type_2>,<type_3>,<type_4>,<type_5>,<type_6>,
<type_7>,<type_8>,<type_9>,<type_10>,<type_11>,<type_12>
Parameter
<type_n>
Sweep mode
SWE
Performs measurement using sweep.
FFT
Performs measurement using FFT.
Details
This command is not available for MS269x Series.
Example of Use
To query the sweep type used for measurement under the current
setting.
SEM:OFFS:LIST:SWE:RUL:RTYP?
> FFT,FFT,FFT,FFT,FFT,FFT,FFT,FFT,FFT,FFT,FFT,FFT