Anritsu MS2830A - [:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1]:VIDeo:AUTO?

2.13 Spectrum Emission Mask
2-613
2
SCPI Device Message Details
[:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1]:VIDeo:AUTO?
Spectrum Emission Mask Offset Video Bandwidth Auto/Manual Query
Function
This command queries the On/Off state of the automatic video bandwidth
(VBW) setting function for the offset during Spectrum Emission Mask
measurement.
Query
[:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1]:VIDeo:AUTO?
Response
<switch_n>
Parameter
<switch_n>
Automatic video bandwidth setting function
On/Off state for Offset-n
1
Automatic video bandwidth setting function is
enabled.
0
Automatic video bandwidth setting function is
disabled.
Details
The setting range of this function is limited depending on the settings of
RBW. Refer to the
MS2690A/MS2691A/MS2692A Signal Analyzer
Operation Manual (Spectrum Analyzer Function Operation)
or
MS2830A/MS2840A Signal Analyzer Operation Manual (Spectrum
Analyzer Function Operation)
for details.
Example of Use
To query the On/Off state of the automatic video bandwidth setting
function for the offset.
SEM:OFFS:LIST:BAND:VID:AUTO?
> 1,1,1,1,1,1,1,1,1,1,1,1