Anritsu MS2830A - [:SENSe]:ACPower:BANDwidth[:RESolution]:AUTO ON|OFF|1|0; :CALCulate:ACPower:BANDwidth[:RESolution]:AUTO ON|OFF|1|0

2.9 ACP
2-431
2
SCPI Device Message Details
[:SENSe]:ACPower:BANDwidth[:RESolution]:AUTO ON|OFF|1|0
Resolution Bandwidth Auto/Manual
Function
This command enables/disables the automatic resolution bandwidth
(RBW) setting function.
Refer to
[:SENSe]:BANDwidth|:BWIDth[:RESolution]:AUTO.
Related command
This command has the same function as the following commands.
[:SENSe]:BANDwidth|:BWIDth[:RESolution]:AUTO
[:SENSe]:CHPower:BANDwidth[:RESolution]:AUTO
[:SENSe]:OBWidth:BANDwidth[:RESolution]:AUTO
:CALCulate:BANDwidth|:BWIDth[:RESolution]:AUTO
:CALCulate:ACPower:BANDwidth[:RESolution]:AUTO
:CALCulate:CHPower:BANDwidth[:RESolution]:AUTO
:CALCulate:OBWidth:BANDwidth[:RESolution]:AUTO
:CALCulate:ACPower:BANDwidth[:RESolution]:AUTO ON|OFF|1|0
Resolution Bandwidth Auto/Manual
Function
This command sets the resolution bandwidth (RBW) automatically.
Refer to
[:SENSe]:BANDwidth|:BWIDth[:RESolution]:AUTO.
Related command
This command has the same function as the following commands.
[:SENSe]:BANDwidth|:BWIDth[:RESolution]:AUTO
[:SENSe]:ACPower:BANDwidth[:RESolution]:AUTO
[:SENSe]:CHPower:BANDwidth[:RESolution]:AUTO
[:SENSe]:OBWidth:BANDwidth[:RESolution]:AUTO
:CALCulate:BANDwidth|:BWIDth[:RESolution]:AUTO
:CALCulate:CHPower:BANDwidth[:RESolution]:AUTO
:CALCulate:OBWidth:BANDwidth[:RESolution]:AUTO