Anritsu MS2830A - :TRIGger[:SEQuence]:VIDeo:LEVel:LINear?

Chapter 2 SCPI Device Message Details
2-276
:TRIGger[:SEQuence]:VIDeo:LEVel:LINear?
Linear Scale Video Trigger Level Query
Function
This command queries the threshold of the level where trigger sweep
starts in video trigger in Linear scale mode.
Query
:TRIGger[:SEQuence]:VIDeo:LEVel:LINear?
Response
<level>
Parameter
<level>
Threshold of the level where trigger sweep starts
When the trigger signal source is video detection (Video) and in
Linear scale mode.
Range 0 to 100%
Resolution 1%
Suffix code None. Value is returned in % units.
Example of Use
To query the threshold of the level where trigger sweep starts.
TRIG:VID:LEV:LIN?
> 50