Anritsu MS2830A - [:SENSe]:POWer[:RF]:ATTenuation:AUTO?

Chapter 2 SCPI Device Message Details
2-62
[:SENSe]:POWer[:RF]:ATTenuation:AUTO?
RF Attenuator Auto/Manual Query
Function
This command queries the On/Off state of the automatic attenuation.
Query
[:SENSe]:POWer[:RF]ATTenuation:AUTO?
Response
<switch>
Parameter
<switch>
Automatic attenuation is disabled/enabled.
0
Disabled.
1
Enabled.
Example of Use
To query the On/Off state of the automatic attenuation setting.
POW:ATT:AUTO?
> 1