Anritsu MS2830A - SEM:SWE:RUL:RTYP?

Chapter
４
Native Device Message Details
4-257
4
Native Device Message Details
SEM:SWE:RUL:RTYP?
Spectrum Emission Mask Sweep Type Select Rules Real Type Query
Function
This command queries the sweep mode (sweep or FFT) that is executed
during reference power measurement in the Spectrum Emission Mask
measurement.
Query
SEM:SWE:RUL:RTYP?
Response
type
Parameter
type
Sweep mode
SWE
Performs measurement using sweep.
FFT
Performs measurement using FFT.
Details
This command is not available for MS269x Series.
Example of Use
To query the sweep mode used for measurement under the current
setting.
SEM:SWE:RUL:RTYP?
> FFT