Anritsu MS2830A - [:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth[:RESolution]:AUTO ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0...

Chapter 2 SCPI Device Message Detail
2-746
[:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth[:RESolution]:AUTO
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0
Spurious Emission Resolution Bandwidth Auto/Manual
Function
This command sets RBW of each segment to Auto/Manual.
Command
[:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth[:RESolution]:
AUTO <switch_n>
Parameter
<switch_n>
RBW in segment n Auto/Manual
ON|1
RBW is set to AUTO.
OFF|0
RBW is set to Manual.
Default
[MS269xA]
Segment 1 to 8 Manual
Segment 9 to 15 Manual (Auto for MS2690A)
Segment 16 to 20 Auto
[MS2830A]
Segment 1 to 6 Manual
Segment 7 to 8 Manual (Auto for Option 040)
Segment 9 to 15 Manual (Auto for Option 040/041)
Segment 16 to 18 Manual (Auto for Option 040/041/043)
Segment 19 to 20 Manual (Auto for Option 040/041/043/044)
[MS2840A]
Segment 1 to 6 Manual
Segment 7 to 8 Manual (Auto for Option 040)
Segment 9 to 18 Manual (Auto for Option 040/041)
Segment 19 to 20 Manual (Auto for Option 040/041/044)
Example of Use
To set RBW to Auto/Manual.
SPUR:BAND:AUTO
ON,ON,ON,ON,ON,ON,OFF,OFF,ON,ON,ON,ON,ON,ON,ON,ON,OFF,OF
F,ON,ON