Anritsu MS2830A - Page 1232

Chapter
４
Native Device Message Details
4-150
Example of Use
To acquire the peak value of absolute power of SEM measurement using
the MyParam.xls parameter list file (n = 10).
MEAS:BATC:SEM? 10,"MyParam.xml"
>
999.0,-999.0,-100.000,-100.000,-60.000,-60.000,45.000,-4
5.000,-30.000,-30.000,-10.000,-10.000,0.000,0.000
Format of Parameter list file
Refer to
:MEASure:BATCh:SEM[n]?
in “Chapter 2 SCPI Device Message
Details”.