Anritsu MS2830A - Page 1234

Chapter
４
Native Device Message Details
4-152
Example of Use
To acquire the measurement result of Spurious Emission measurement
(when Result Mode = A, Spurious Emission Result Type = Worst)
FETC:SPUR? 1,"MyParam.xml"
>
0,1,1,135618.00,-64.25,51.25,-13.00,0,2,2,155970.00,-63.
91,50.91,-13.00,0
••••
Format of Parameter list file
Refer to
:MEASure:BATCh:SUPRious [n]?
in “Chapter 2 SCPI Device
Message Details”.