Anritsu MS2830A - Page 1236

Chapter
４
Native Device Message Details
4-154
is not exceeded.
Range
[MS269xA]
–140 to –5 dBm
[MS2830A], [MS2840A]
–40.00 to +20.00 dBm (>25 MHz)
–40.00 to +2.00 dBm (≤25 MHz)
–136.00 to +15.00 dBm (>25 MHz) (Option
022/122)
–136.00 to –3.00 dBm (≤25 MHz) (Option
022/122)
Resolution 0.01 dBm
sg_max_level
Set the SG maximum output level.
When inserting a DUT, specify the DUT input
level and RF Input so the maximum input level
is not exceeded.
Range
[MS269xA]
–140 to –5 dBm
[MS2830A], [MS2840A]
–40.00 to +20.00 dBm (> 25 MHz)
–40.00 to +2.00 dBm (≤ 25 MHz)
–136.00 to +15.00 dBm (> 25 MHz) (Option
022/122)
–136.00 to –3.00 dBm (≤ 25 MHz) (Option
022/122)
Resolution 0.01 dBm
Suffix code DBM,DM
target
Target level when executing power adjustment.
Range –150 to 30 dBm (Pre-Amp Off)
–150 to 10 dBm (Pre-Amp On)
When adding the reference offset, the added
value is the setting range.
Resolution 0.01 dBm
Suffix code DBM,DM
range
Power adjustment range
Power adjusted is evaluated as PASS when
adjustment is within the specified range
Range 0 to 20 dB
Resolution 0.01 dB
Suffix code DB
frequency
Power adjustment execution frequency
Range
[MS269xA]
125 MHz to 6 GHz
[MS2830A]
250 kHz to 3.6 GHz (Option 020/120)
250 kHz to 6 GHz (Option 041/043, and 021/121)