Anritsu MS2830A - Page 336

Chapter 2 SCPI Device Message Details
2-326
When Standard is set to W-CDMA Downlink (OBW measurement)
<pattern>
Parameter to be set
DOWNLINK
3GPP W-CDMA Downlink
When omitted: 3GPP W-CDMA Downlink
When Standard is set to W-CDMA Downlink (Channel Power
measurement)
<pattern>
Parameter to be set
DOWNLINK
3GPP W-CDMA Downlink, Mean Power
measurement
MEAN
3GPP W-CDMA Downlink, Mean Power
measurement
RRCFILTER
3GPP W-CDMA Downlink, RRC Filtered Power
measurement
When omitted: 3GPP W-CDMA Downlink, Mean Power
measurement
When Standard is set to W-CDMA Downlink (Spectrum Emission Mask
measurement)
<pattern>
Parameter to be set
43
3GPP W-CDMA Downlink (P ≥ 43 dBm)
39
3GPP W-CDMA Downlink (39 dBm ≤ P < 43
dBm)
31
3GPP W-CDMA Downlink (31 dBm ≤ P < 39
dBm)
31U
3GPP W-CDMA Downlink (P < 31 dBm)
A43
3GPP W-CDMA Downlink (P ≥ 43 dBm
(Additional)
A39
3GPP W-CDMA Downlink (39 dBm ≤ P < 43
dBm (Additional)
A31
3GPP W-CDMA Downlink (31 dBm ≤ P < 39
dBm (Additional
)
When omitted: 3GPP W-CDMA Downlink (P ≥ 43 dBm)
When Standard is set to Mobile WiMAX (ACP/OBW/Channel Power
measurement)
<pattern>
Parameter to be set
10M
10 MHz BW (Channel Bandwidth 10 MHz)
5M
5 MHz BW (Channel Bandwidth 5 MHz)
When omitted: 10 MHz BW