2.8 Measure Function
2-333
2
SCPI Device Message Details
DLT34
DL Trace Point Tune 34 dBm ≤ P
DLT26
DL Trace Point Tune 26 dBm ≤ P < 34 dBm
DLT26U
DL Trace Point Tune P < 26 dBm
ULT53
UL Trace Point Tune –53.5 dBm ≤ P
ULT55
UL Trace Point Tune –55 dBm ≤ P
DL34
Downlink Actual 34 dBm ≤ P
DL26
Downlink Actual 26 dBm ≤ P < 34 dBm
DL26U
Downlink Actual P < 26 dBm
UL53
Uplink Actual –53.5 dBm ≤ P
UL55
Uplink Actual
−
55 dBm ≤ P
DLF34
Downlink Fast 34 dBm ≤ P
DLF26
Downlink Fast 26 dBm ≤ P < 34 dBm
DLF26U
Downlink Fast P < 26 dBm
ULF53
Uplink Fast –53.5 dBm ≤ P
ULF55
Uplink Fast –55 dBm ≤ P
When omitted: DL Trace Point Tune 34 dBm ≤ P
When Standard is set to XG-PHS (OBW Measurement)
<pattern>
Parameter to be set
10MBW
10 MHz BW
20MBW
20 MHz BW
When omitted: 10 MHz BW
When Standard is set to XG-PHS (CHP Measurement)
<pattern>
Parameter to be set
MEAN_10MBW
Mean Power 10 MHz BW
MEAN_20MBW
Mean Power 20 MHz BW
When omitted: Mean Power 10 MHz BW
When Standard is set to XG-PHS (Spectrum Emission Mask
Measurement)
<pattern>
Parameter to be set
BS_10MBW
Base station channel interval: 10 MHz
UE_10MBW
Mobile station channel interval: 10 MHz
When omitted: Base station channel interval: 10 MHz
When Standard is set to CDMA2000 Forward Link (ACP, Burst Average,
Channel Power, OBW measurement)
<pattern>
Parameter to be set
CDMA2KFWD
CDMA2000 Forward Link
When omitted: CDMA2000 Forward Link
To Next Page
Loading...
