Anritsu MS2830A - Page 688

Chapter 2 SCPI Device Message Details
2-678
Judges “OR” using the absolute level upper limit
1 and relative level upper limit. Judges “AND”
using the result and the absolute level upper
limit 2.
AND2
ABS1 and ABS2
Judges using the absolute level upper limit 1
and the absolute level upper limit 2.
Example of Use
To judge using the absolute level upper limit 1.
CALC:SEM:LOG:OFFS:LIST:TEST
ABS,ABS,ABS,ABS,ABS,ABS,ABS,ABS,ABS,ABS,ABS,ABS
Related command
This command has the same function as the following command.
[:SENSe]:SEMask:LOGic:OFFSet[1]:LIST:TEST