III
Manual Configuration
Section 1 Product Overview
This section explains the overview, product configurations and the specifica-
tions of MT8820A.
Section 2 Setup
This section explains the name and function of each part, installation of
MT8820A, and connection method with external devices.
Section 3 Getting Started
This section explains the operation flow of MT8820A from turning On the
power and measuring to turning Off the power.
Section 4 Basic Operation
This section explains the basic operation procedure of MT8820A. Basic
operations required for measurement, such as usage of basic items and
parameter settings, are provided.
Section 5 Using Common Functions
This section explains the operation procedure of common functions in meas-
urement software such as initialization and measurement start.
Section 6 Common Screen Functions
This section explains the common screen functions. Functions explained in
this section are common for all measurement software.
Section 7 Remote Control using PC
This section explains the basic operation of remote control commands and
status reports for remote control of MT8820A using a PC.
Section 8 Remote Control Commands
This section explains the remote control commands implementing common
functions in measurement software, such as IEEE488.2 common commands
etc.
Section 9 Maintenance
This section explains the performance test and calibration procedure to use
MT8820A in its optimal status.
To Next Page
Loading...
