iv
For Safety
CAUTION
1. Keep the power supply and cooling fan free of dust.
• Clean the power inlet regularly. If dust accumulates around the
power pins, there is a risk of fire.
• Keep the cooling fan clean so that the ventilation holes are not ob-
structed. If the ventilation is obstructed, the cabinet may overheat
and catch fire.
2. Use two or more people to lift and move this equipment, or use a trol-
ley. There is a risk of back injury, if this equipment is lifted by one
person.
3. NEVER input a signal of more than the indicated value between the
measurement terminal and ground. Input of an excessive signal may
damage the inside of equipment.
Cleaning
Measurement
terminal
To Next Page
Loading...
