For Safety
v
CAUTION
This equipment uses a fluoridation graphite lithium battery to back-up the
memory. This battery must be replaced by a service engineer when it has
reached the end of its useful life; contact the Anritsu sales section or your
nearest representative.
Note: The battery used in this equipment has a maximum useful life of 7
years. It should be changed before this period has elapsed.
This equipment uses plug-in memory cards (PMCs) as external media for
storing data and programs.
If this media is mishandled, important data may be lost. To prevent this
chance occurrence, all important data and programs should be backed-
up.
Anritsu will not be held responsible for lost data.
Pay careful attention to the following points. In particular, never remove
the PMC from the pulse tester, while it is being accessed. For details,
refer to the section 2.4 in the manual dealing with PMCs.
PMCs are easily damaged by static electric charges.
This instrument uses parts with operating time or power-on time life span.
These parts must be replaced at the customer’s expense even if within
the guaranteed period described in Warranty in the beginning of this
manual.
Pay attention to the life span of parts used in continuous long-time opera-
tion.
Replacing memory
back-up battery
Storage media
Life Time of Parts
To Next Page
Loading...
